tj@steeda's latest activity
-
tj@steeda posted the thread Steeda's President's Day Flash Sale - Ending Soon! in Sponsor Announcements, Giveaways, Contests.Sale ends soon - up to 25% off during our sale - www.steeda.com -
-
tj@steeda replied to the thread New Steeda Q850 Streetfighter.Each package is customizable & this particular customer chose those specific specs - it is ready for the track but would optimize the...
-
tj@steeda posted the thread Get Your Heart Racing with 25% Off! in Sponsor Announcements, Giveaways, Contests.Happy Valentine’s Day to your ride — they are the only one who gets you :) so treat them well this Valentine's Day #MyCarIsMyValentine...
-
-
tj@steeda reacted to BTL's post in the thread Does anyone make jack rails for the S650 convertible yet? with
Like.
No, I didn't. I used a floor jack and positioned it toward the front of the rail. Did it on both sides. Again, no problems. -
tj@steeda replied to the thread Does anyone make jack rails for the S650 convertible yet?.We spoke to another customer and felt the matter didn't need to be addressed further, as we spoke to another customer - we were...
-
tj@steeda reacted to TUnica's post in the thread Does anyone make jack rails for the S650 convertible yet? with Like.
That's good news, did you jack at the mid span?
-
tj@steeda reacted to BTL's post in the thread Does anyone make jack rails for the S650 convertible yet? with Like.
Well, I actually had to jack up my car this past weekend while installing some parts. The rails appeared to have worked perfectly. Can...
-
tj@steeda replied to the thread 2024 Gt PP.. BMR Springs / FP track / Bilstein / Steeda ??.Yes, yes they are :)
-
tj@steeda reacted to svtfever's post in the thread 2024 Gt PP.. BMR Springs / FP track / Bilstein / Steeda ?? with Like.
Steeda is great. I had them at one point. Now I have the BMR handling springs with the FP Track shocks/ struts and WOW!!! It’s a firmer...
-
tj@steeda replied to the thread Does anyone make jack rails for the S650 convertible yet?.I spoke with you several times & also included our manufacturing team - if it wasn't you, then it was Tom we spoke with to review the...
-
tj@steeda replied to the thread Does anyone make jack rails for the S650 convertible yet?.They are the same product, and yes, our team has the expertise to assist with your question - we did adjust longer bolts in the front...
-
tj@steeda replied to the thread New Steeda Q850 Streetfighter.Our Steeda Build Team is flexible - shoot me an email & I can put you in contact with them if you are looking to transform your car into...
-
tj@steeda replied to the thread Steeda K-member Brace Install and first Impression review.If there is technical support/or questions that are needed above & beyond what is in this thread - I am happy to put you in contact with...
-
tj@steeda replied to the thread New Steeda Q850 Streetfighter.Haha, shipping to CAD is too expensive :) - I am told they were offering both 19" & 20" as options, but the 19" was lifted vs. the 20".
-
tj@steeda replied to the thread New Steeda Q850 Streetfighter.Thank you - appreciate the heads-up. I will let our team know. TJ
-
tj@steeda replied to the thread New Steeda Q850 Streetfighter.A great write-up by Steve Turner...
-
Dang. Somebody is doing it right. And marketing it right. and 178 lbs of light weighting ( not including the additional weight of the...
-
Looks good! Love those Tridents! I was one of the first peeps to get those Tridents in Canada on my S550. They got a LOT of attention...
-
tj@steeda replied to the thread Stage 3 of Our Steeda 2024 HPDE Mustang is Here!.We started at approximately 3,728 pounds ... reduced down to 3,600 pounds - no driver, quarter tank of gas, race tires & wheels. We...
-
tj@steeda reacted to broncoboy22's post in the thread Stage 3 of Our Steeda 2024 HPDE Mustang is Here! with Like.
I wish Steeda was afforded the opportunity of engineering specialty Mustang models direct from ford. I feel like they would knock it out...
-
tj@steeda replied to the thread Stage 3 of Our Steeda 2024 HPDE Mustang is Here!.Let me see if I can get this info for you - I don't see it readily available from the YouTube overview. Best, TJ
-
tj@steeda reacted to Upacurb's post in the thread Stage 3 of Our Steeda 2024 HPDE Mustang is Here! with Like.
Heck yeah Steeda ...not just throwing on a Whipple and some stripes...cough gt350 cough ... you guys are doing it right!
-
tj@steeda replied to the thread H Pipe voids warranty?.That's what we love to hear!! Thank you for sharing :) Best, TJ
-
tj@steeda replied to the thread 2024 Gt PP.. BMR Springs / FP track / Bilstein / Steeda ??.Hello, Happy to put you in contact with our tech team - they can help guide the conversation & provide some technical feedback - happy...
-
tj@steeda posted the thread Stage 3 of Our Steeda 2024 HPDE Mustang is Here! in S650 Mustang General Topics.While we were very impressed with the time we got on our coil over setup with our S650 HPDE Mustang, we knew we could squeeze more out...
-
tj@steeda replied to the thread Steeda K-member Brace Install and first Impression review.Thank you - I wasn't positive if it was more of a technical analysis being requested or just the difference in the 2 parts.
-
tj@steeda replied to the thread Steeda K-member Brace Install and first Impression review.I will have to get some info from our tech team - what differences are you looking for?
-
tj@steeda replied to the thread question for Nitto 555 G2 owners.This video may help provide some insight:
-
tj@steeda replied to the thread Steeda x-pipe exhaust for mustang 2024 GT premium.Private Message coming your way on the discount code, I had mine installed on an S550, it was about $200.00 in Michigan if that helps...
-
tj@steeda replied to the thread Steeda K-member Brace Install and first Impression review.We appreciate your feedback & support - if anyone needs any future support, feel free to reach out to me at [email protected] Have a great...
-
tj@steeda reacted to GhastlyTT's post in the thread Steeda K-member Brace Install and first Impression review with Like.
This is Steeda's g-trac 4 point k-member brace, not their replacement k-member. I installed it on my Dark Horse but didn't have to...
-
tj@steeda reacted to zpduff's post in the thread Steeda K-member Brace Install and first Impression review with Like.
So the factory K member isn't the same thing as the Steeda part? Assumed it would be very similar. Still waiting on my non pp 25 gt but...
-
tj@steeda reacted to PBBLASTER's post in the thread Steeda K-member Brace Install and first Impression review with Like.
I added the @Steeda K-member brace on my 2025 GT with PP. It took some light mods to the undertray to make it fit. I also had to drill...
-
tj@steeda replied to the thread Resources to learn more about cars.We have a solid library of information on the Ford Mustang - specifically the Dark Horse, here:
-
tj@steeda posted the thread Did You Know ... Steeda's On-Track Testing: Engineering Excellence for Your Mustang in S650 Mustang General Topics.Mustang 7G Community, At Steeda, we don’t just design parts; we perfect them through rigorous on-track testing. Our mission has always...
-
