Handling Package Splash Guards

[uin2it]

Dark Horse Handling Package Splash Guards
From DKs Garage (Designer of the Trunk Pull Tab) Comes...

The Dark Horse Splash Guards for those with the Handling Package Wheel Well Arches. They attach using the stock hardware at THREE Mounting points. They are made to match the stock side splitter texture as well for a seamless look.
Save your car from rocks and debris.
These are available now shipped to the United States & Canada and can be found on my Etsy page:
https://dksgarage.etsy.com/listing/1849694079/2021-mach1-hp-splash-guards

Sponsored

 

[NightSurgeX2]

Nice, but can you tell me why these are better than the full size rock guards already on the market? These seem very small/limited in comparison. There still seems like a good amount of space for rocks. Especially if you show the image with the wheels perfectly straight, they likely still stick out further than these guards

 

[uin2it]

Nice, but can you tell me why these are better than the full size rock guards already on the market? These seem very small/limited in comparison. There still seems like a good amount of space for rocks. Especially if you show the image with the wheels perfectly straight, they likely still stick out further than these guards

Absolutley, so there are fantastic full sized options on the market for most Dark Horse mustangs. However These splash guards I sell are for the Handling Package Dark Horse cars that have the extended Wheel well arches. (See pic below)

Unfortunately these arches don't allow for the use of the full splash guards as seamlessly.
So, I have developed my design as an option for protection on the handling package cars. It's better than nothing and work using the stock hardware with Zero modification to the car.

 

[So0_NaSTy]

How are the factory wheel arches installed on the dark horse? It just bolts to the fender lining or something? And are the arches on all dark horses or strictly the HP ones?

 

[NightSurgeX2]

Interesting, I had no issues with the full size ones, no modifications or anything. Maybe that was only an issue for the Mach 1?

 

[Decible]

Interesting, I had no issues with the full size ones, no modifications or anything. Maybe that was only an issue for the Mach 1?

I used the rokbloc ones without issue.

 

[flyinlow007]

Interesting, I had no issues with the full size ones, no modifications or anything. Maybe that was only an issue for the Mach 1?

Which splash guards are these?

 

[NightSurgeX2]

Which splash guards are these?

From a guy on Facebook. I've been trying to get him to setup an official online storefront lol. Mike Savas on the various S650 mustang groups

 

[HOWABOUT]

Interesting, I had no issues with the full size ones, no modifications or anything. Maybe that was only an issue for the Mach 1?

I have the Mach 1 with the HP and I am looking for

Interesting, I had no issues with the full size ones, no modifications or anything. Maybe that was only an issue for the Mach 1?

I have Mack 1 with HP and I am looking for splash guards like yours. How did you attach them and do you have pictures? Maybe the dark horse is different but I would like to see if it's possible to have them on a Mach 1. Many thanks

 

[RacerMach1]

I have the Mach 1 with the HP and I am looking for

I have Mack 1 with HP and I am looking for splash guards like yours. How did you attach them and do you have pictures? Maybe the dark horse is different but I would like to see if it's possible to have them on a Mach 1. Many thanks

Here is mine.

 

[HOWABOUT]

Here is mine.

 

[HOWABOUT]

here's my Mach 1 maybe I can sort of fix it to fit. I dont have the top screw so maybe attach with tape Thanks

 

[RacerMach1]

here's my Mach 1 maybe I can sort of fix it to fit. I dont have the top screw so maybe attach with tape Thanks

There is an attachment for the top screw that comes with the flaps, just follow the instructions and you wont have issues. Use the smaller silver washer for the top screw is my only tip.

 

[HOWABOUT]

There is an attachment for the top screw that comes with the flaps, just follow the instructions and you wont have issues. Use the smaller silver washer for the top screw is my only tip.

Sorry little confused. Can you tell me the make and model of your flaps? Thanks

 

[RacerMach1]

Sorry little confused. Can you tell me the make and model of your flaps? Thanks

https://rokblokz.com/products/ford-mustang-v6-ecoboost-gt-splash-guards-15-17

I have the middle "pp2 v6 ecoboost gt" option model.

Sponsored