2024 Mustang Camera Guidelines mssing after warranty repair

[Jack91328]

As the title says, I recently had my camera replaced under warranty, the guidelines are missing despite unplugging the battery and doing a master reset. What's the procedure for resetting something like this in ForScan?

Sponsored

 

[SkifG]

There is a switch in settings or features to turn the lines on.

 

[Jack91328]

There is a switch in settings or features to turn the lines on.

On the 2024 model? I have searched but have found nothing.

 

[Sofa King]

There are conditions where the guidelines are off... such as battery disconnected (must drive over 12.4mph to reactivate) Pages 205,206 in the manual can tell you more.

 

[Jack91328]

There are conditions where the guidelines are off... such as battery disconnected (must drive over 12.4mph to reactivate) Pages 205,206 in the manual can tell you more.

Read those pages of the manual. Driven about 50 miles and I have disconnected the battery and put it back after 30 minutes.

 

[Sofa King]

Read those pages of the manual. Driven about 50 miles and I have disconnected the battery and put it back after 30 minutes.

You do have the manual zoom off? did you look in the settings here:
Features/Driver Assistance/Rear View Camera
I thought there was a setting for the guide lines in there... been a couple months since I have driven mine

 

[SkifG]

Features/Driver Assistance/Rear View Camera

That sounds right to me.

 

[Jack91328]

That sounds right to me.

Nothing in there about it on the 24

Sponsored