Supporting Mods with my Whipple Gen 2

[lolsrt40]

Hello everyone,
I’m interested in throwing a whipple on my gen 2 manual coyote and I’m wondering some supporting mods I’ll need to accompany the SC, I’m looking for around 600-700 hp street car.

I have done lots of digging in the forums/internet and I can’t seem to find anyone who gives direct answers. For now I will be upgrading to a McLeod RST clutch with a Barton Hybrid 3 shifter and picking up a tune from Lund. I’m just wondering what else I’ll need to put on it to make it a solid car for some daily driving. I understand I’ll need new oil pump gears and a new crank sprocket however this is my first build and I want to do it right.

If you need anymore information let me know and I’ll respond as quickly as I can. I appreciate the input and your guys’ opinions. Thank you

Sponsored

 

[robvas]

You don't need oil pump gears. You're going to want some drag radials for the rear.

I would suggest going with the stage 2 upgrades right away. bigger heat exchanger, smaller pulley, larger throttle body. That's all you really need.

 

[lolsrt40]

You don't need oil pump gears. You're going to want some drag radials for the rear.

I would suggest going with the stage 2 upgrades right away. bigger heat exchanger, smaller pulley, larger throttle body. That's all you really need.

I knew I’d need a bigger tire but didn’t think about the stage 2 upgrades. Thank you my friend 🫡

Sponsored