Black out pannel on ebay

[Mr Hyde]

150. 00 ish usd shipped yes i have one incoming and will update on its look and fitment. https://www.ebay.com/itm/2264363419...lp:2508447&itmmeta=01JCE8Q0131K7M3EKQDGGKCB81

Sponsored

 

[Cobrakit]

Another option. Ford has there own, made by Air Design.

https://www.ford.com/product/exterior-trim-trunk-applique-gloss-black-by-air-design-p2738980236?fmccmp=marketplace-gs-cta-accessories&searchid=20643481100|157311292289|pla-293946777986&fcid=pse_20643481100_google-pla&ef_id=Cj0KCQiA88a5BhDPARIsAFj595gQjwA_nvarvBSxyyKDj6_2yBNR1_Z4WDs7-qPsLFmVdcWIeeZOlVAaAjvHEALw_wcB:G:s&s_kwcid=AL!2519!3!676763613569!!!g!293946777986!!20643481100!157311292289&gad_source=1&gclid=Cj0KCQiA88a5BhDPARIsAFj595gQjwA_nvarvBSxyyKDj6_2yBNR1_Z4WDs7-qPsLFmVdcWIeeZOlVAaAjvHEALw_wcB

 

[Mr Hyde]

Another option. Ford has there own, made by Air Design.

https://www.ford.com/product/exterior-trim-trunk-applique-gloss-black-by-air-design-p2738980236?fmccmp=marketplace-gs-cta-accessories&searchid=20643481100|157311292289|pla-293946777986&fcid=pse_20643481100_google-pla&ef_id=Cj0KCQiA88a5BhDPARIsAFj595gQjwA_nvarvBSxyyKDj6_2yBNR1_Z4WDs7-qPsLFmVdcWIeeZOlVAaAjvHEALw_wcB:G:s&s_kwcid=AL!2519!3!676763613569!!!g!293946777986!!20643481100!157311292289&gad_source=1&gclid=Cj0KCQiA88a5BhDPARIsAFj595gQjwA_nvarvBSxyyKDj6_2yBNR1_Z4WDs7-qPsLFmVdcWIeeZOlVAaAjvHEALw_wcB

I know ordered one 3 weeks ago still hasn't shipped. Had the same problem when I used my ford points to buy their wing took 3 1/2 weeks to ship. I'm not a big fan of air design. Due to lack of communication and after purchase support. I am In the process of having American muscle cancel it. Should have the other in a week or two. It's a vendor I've purchased from in the past.

 

[Cobrakit]

I had issues with American Muscle and Air Design. It took 3 tries to get the right part, but they did let me keep one extra one.

 

[Doug Watson]

I just had it wrapped gloss black for 200.

 

[Cobrakit]

I had mine wrapped with faux black carbon fiber. Not to steal post.

 

[Mr Hyde]

all good points. Unfortunately Florida sun isn't kind to vinyl or wraps on cars hell it can kick the crap out of your paint. I also believe the GT on the back of the s650 uses alignment pins which leaves holes if you take the badge off. I was looking for an option that would leave a smooth finish but not be irreversible if i wanted to change it back. The panel gives that option.

 

[Mr Hyde]

I had issues with American Muscle and Air Design. It took 3 tries to get the right part, but they did let me keep one extra one.

Sounds about right for them. I'M really not a fan of either but at least they fixed it and with a bonus. Not sure what's going on with aftermarket parts manufacturers but it seems to be a thing with this generation of mustang.

 

[Cobrakit]

I also believe the GT on the back of the s650 uses alignment pins which leaves holes if you take the badge off.

Yes. 2 alignment holes. Problem with the factory panel from years past was that they scratched easily.

Sponsored