Dark Horse Performance Splitter in stock anywhere?

[topdawg4ever]

Anyone happen to find the performance splitter in stock? I’m in Ohio.

Sponsored

 

[roadpilot]

Not sure, but did you ever get clarification if the DHHP splitter will fit on the DH non-HP car? I saw the other thread and nobody seemed to confirm this one was or the other.

DHHP front splitter P/N is PR3Z-17626-AA correct?

And do you or do you not need that second part number (bracket) - PR3Z-17C897-A?

Oh, and do you not have your DH yet? Your profiles shows Vehicles: NA

 

[topdawg4ever]

Based on diagrams and fit check on Fords sites, this is the correct part. You need the entire assembly.

I updated my signature last week but forgot to update vehicles.

Dark Horse Premium, Vapor Blue, 6 speed, A700.

Not sure, but did you ever get clarification if the DHHP splitter will fit on the DH non-HP car? I saw the other thread and nobody seemed to confirm this one was or the other.

DHHP front splitter P/N is PR3Z-17626-AA correct?

And do you or do you not need that second part number (bracket) - PR3Z-17C897-A?

Oh, and do you not have your DH yet? Your profiles shows Vehicles: NA

 

[NightSurgeX2]

Based on diagrams and fit check on Fords sites, this is the correct part. You need the entire assembly.

I updated my signature last week but forgot to update vehicles.

Dark Horse Premium, Vapor Blue, 6 speed, A700.

You don't need the bracket PR3Z-17C897-A.

Just everything that comes with PR3Z-17626-AA. That's what @roket confirmed for me a while back as well.

 

[JoseG]

Not sure, but did you ever get clarification if the DHHP splitter will fit on the DH non-HP car? I saw the other thread and nobody seemed to confirm this one was or the other.

DHHP front splitter P/N is PR3Z-17626-AA correct?

And do you or do you not need that second part number (bracket) - PR3Z-17C897-A?

Oh, and do you not have your DH yet? Your profiles shows Vehicles: NA

It is a direct bolt on and I fitted it to my non-HP Dark Horse. The DHHP splitter is a two piece deal which requires the non-HP smaller splitter to be removed.

 

[roadpilot]

It is a direct bolt on and I fitted it to my non-HP Dark Horse. The DHHP splitter is a two piece deal which requires the non-HP smaller splitter to be removed.

I'm confused. @NightSurgeX2 says I do NOT need the PR3Z-17C897-A bracket part number, but you say PR3Z-17C897-AA and PR3Z-17C897-A are both needed to add the DHHP splitter to the non-DHHP Dark Horse?

 

[JoseG]

I'm confused. @NightSurgeX2 says I do NOT need the PR3Z-17C897-A bracket part number, but you say PR3Z-17C897-AA and PR3Z-17C897-A are both needed to add the DHHP splitter to the non-DHHP Dark Horse?

I didn’t mean to cause confusion. The bracket is not needed and NightSurge is correct. I ordered the splitter from Blue Oval Industries with the following description and part number:

2024 Mustang Dark Horse OEM PR3Z-17626-AA Handling Package Front Lower Chin Splitter

But it seems that website is sold out of them.

 

[roadpilot]

I didn’t mean to cause confusion. The bracket is not needed and NightSurge is correct. I ordered the splitter from Blue Oval Industries with the following description and part number:

2024 Mustang Dark Horse OEM PR3Z-17626-AA Handling Package Front Lower Chin Splitter

But it seems that website is sold out of them.

If you don't mind me asking, what was your cost including shipping?

 

[Race Red]

I didn’t mean to cause confusion. The bracket is not needed and NightSurge is correct. I ordered the splitter from Blue Oval Industries with the following description and part number:

2024 Mustang Dark Horse OEM PR3Z-17626-AA Handling Package Front Lower Chin Splitter

But it seems that website is sold out of them.

Jose G, how straightforward was the installation of the splitter?

 

[JoseG]

The shop that installed it said it was really simple; no surprises whatsoever. Just removed the small non-HP splitter that’s there and bolt in the new one.

 

[JoseG]

Jose G, how straightforward was the installation of the splitter?

Just saw I didn’t reply directly to your message . The shop that installed it said it was really simple; no surprises whatsoever. Just removed the small non-HP splitter that’s there and bolt in the new one.

 

[Race Red]

Just saw I didn’t reply directly to your message . The shop that installed it said it was really simple; no surprises whatsoever. Just removed the small non-HP splitter that’s there and bolt in the new one.

10-4 Thanks!

Sponsored