Front license plate

[Jekyll_Hyde]

Has anyone found an alternative to drilling holes in their front bumper for the NJ front license plate requirement?

Sponsored

 

[Mikestang24]

Has anyone found an alternative to drilling holes in their front bumper for the NJ front license plate requirement?

Stow n sho front lp holder. Uses existing screws and mounts lower left side if you have 401A car. It's quick release. Looks great

 

[fordfanatic6891]

This! only way to go if you ask me!

Stow n sho front lp holder. Uses existing screws and mounts lower left side if you have 401A car. It's quick release. Looks great

 

[Sofa King]

The holes go in the grill, not the bumper... the factory bracket is the best... secure, dead center, and doesn't block the radar sensor. I don't like front plates either, but most of the optional mounts leave something to be desired.

 

[Mikestang24]

The holes go in the grill, not the bumper... the factory bracket is the best... secure, dead center, and doesn't block the radar sensor. I don't like front plates either, but most of the optional mounts leave something to be desired.

Stow N Sho mounts to bottom of front splitter, using existing screws. Mounts on drive side and doesn't block radar. Plus you can pop it off in 2 seconds and pop it back on in 2 seconds

 

[Sofa King]

Stow N Sho mounts to bottom of front splitter, using existing screws. Mounts on drive side and doesn't block radar. Plus you can pop it off in 2 seconds and pop it back on in 2 seconds

I can see the point of that if you pop it off alot for shows... but still looks like ass driving around with it off center... JMO

 

[Jekyll_Hyde]

Ford attached it to my bumper. I’m getting g quotes to fix my bumper.

 

[Mikestang24]

Stow N Sho mounts to bottom of front splitter, using existing screws. Mounts on drive side and doesn't block radar. Plus you can pop it off in 2 seconds and pop it back on in 2 seconds

The pics show center mount, but it actually mounts left of center on driver side.

I can see the point of that if you pop it off alot for shows... but still looks like ass driving around with it off center... JMO

The off center deal bothered me for about 5 minutes. The not drilling holes part not so much. It's in the trunk most of the time anyway.... unless popo stops me, and I'm like'oh shit I forgot to put that back on after the car wash '

 

[Jekyll_Hyde]

I plan to only attach it if forced by the authorities.

 

[Jekyll_Hyde]

The pics show center mount, but it actually mounts left of center on driver side.
The off center deal bothered me for about 5 minutes. The not drilling holes part not so much. It's in the trunk most of the time anyway.... unless popo stops me, and I'm like'oh shit I forgot to put that back on after the car wash '

Exactly!

 

[Mikestang24]

Exactly!

Knocking on wood, the only thing I've been stopped for is the front plate and that was 3 Mustangs ago!

 

[Jekyll_Hyde]

I also have some popo friends so I should be fine.

 

[mustangmike2176]

Sto N Sho for the win. No holes were drilled, as mentioned above.

 

[martin]

Stow n sho gives a product for Dark Horse and e-mach
What about Mustang GT?

 

[Jekyll_Hyde]

Stow n sho gives a product for Dark Horse and e-mach
What about Mustang GT?

Sponsored