• Welcome to Mustang7G!

    If you're joining us from Mustang6G, then you may already have an account here!

    As long as you were registered on Mustang6G as of March 10, 2021 or earlier, then you can simply login here with the same username and password!

Help Needed- Convertible Top Alignment

ivonovi

Well-Known Member
Joined
Mar 23, 2015
Threads
4
Messages
52
Reaction score
29
Location
Australia
Vehicle(s)
Mustang GT Convertible Shadow Black, 17/Feb
So I am reaching out from sunny OZ for some help. I have spoken to my Ford dealer, but considering the lack of convertibles here, I am very doubtful of his ability/expertise to assist.

Here goes, with the roof fully closed i.e. engaged, there is difference between how flush the roof sits with the windscreen horizontal bar. Towards the driver side, i can barely get my finger half a cm through, however at the passenger side it can slide in nearly an inch ( see the attached photographs, also keep in mind that we have Right Hand Drives in Australia)

On the face of it, it seems as if the roof is sitting flush with one side of the windscreen bar...I guess the photo's should explain.

Any suggestions/thoughts on how this could be fixed
Thanks in advance

1741650745561-aw.jpg
1741650772021-rn.jpg
Sponsored

 

CVCashmere

Well-Known Member
Joined
Mar 28, 2017
Threads
3
Messages
524
Reaction score
21
Location
South Jersey
Vehicle(s)
15 GT Vert w/Steeda lower brace, PP sways, 50th wh
Hello Ivonovi

Your top is basically the same as the S550 series tops.

Here is a troubleshooting guide that may/may not help as it addresses the electronics and motors that move your top up.

It may help explain why your top goes up crooked.

Thanks

CVCashmere
 

Attachments

 








Top