Installed: 2024 Mustang GT Roush Axleback Bigger Quad Tips (Non-Active)

[Spartant2112]

Just installed a Roush axle back with quad tips for non-active mustangs. I ended up cutting the rear valence and it looks pretty good. Only issue is the tips are small so you can see the muffler and it just doesn't fill in the space very well. Does anyone know of a website I can get better/bigger tips that fit Roush mufflers or have any recommendations of some quad tips? I'm having a hard time finding some because Roush has offset tips which the only one I found was the Corsa ones but they're like $500 and I don't know if they fit using the clamps. I found plenty of "Y" tips but not offset ones. Also don't want to speed that much when the entire axleback was like $750.

Sponsored

 

[86pagt]

Drop the muffles and paint them black.. still wont fill the space but will blend in better ..

 

[MAT1955]

Don't even have to drop the mufflers to paint them. I painted-out the mufflers on my 2014 and it looked great. I taped-off nearby body panels and frame members with some cheap painters' plastic sheeting from Dollar Store, took about 15 minutes a side. I used high temp paint, two coats and touched-it up after a few years. Mufflers disappeared. IMO looked good, got lots of compliments.

 

[jboogie1289]

I think even on the DH with the Larger exhaust tips, you can still see the Muffler in that brushed Steel look. Not sure if you are just going for the totally Blacked out look but I guess the painting options is the only thing that would work. I have the Corsa Sport Performance AE Axle Back setrup and I believe the Tips (4”) are larger than Stock and I still see my muffler behind the Tips.

 

[SSuperDave]

I could not find any offset quad tips in chrome, and I hated the single tip so bad that I got an NXT quad tip axleback and used the online template to trim the valance. It fills the holes and looks and sounds exactly like I wanted, but you can still see the mufflers like the OP mentions. I'm not spray painting polished stanless steel muffler though!

 

[Cucurú]

Just installed a Roush axle back with quad tips for non-active mustangs. I ended up cutting the rear valence and it looks pretty good. Only issue is the tips are small so you can see the muffler and it just doesn't fill in the space very well. Does anyone know of a website I can get better/bigger tips that fit Roush mufflers or have any recommendations of some quad tips? I'm having a hard time finding some because Roush has offset tips which the only one I found was the Corsa ones but they're like $500 and I don't know if they fit using the clamps. I found plenty of "Y" tips but not offset ones. Also don't want to speed that much when the entire axleback was like $750.

East fix, very expensive. Install SC of choice, and ass you pass a vehicle they won't have time to stare at the zit, I mean through the mile wide gap to see the muffler

 

[Spartant2112]

East fix, very expensive. Install SC of choice, and ass you pass a vehicle they won't have time to stare at the zit, I mean through the mile wide gap to see the muffler

It has a whipple on it. Lol

 

[Cucurú]

It has a whipple on it. Lol

Ah. An SC is the best acne cream. They won't even know what passed them by.

 

[jboogie1289]

Now here's something cool and the time saving ...

 

[Cucurú]

Now here's something cool and the time saving ...

Nice. Now my father in law wants a white one. May have to call Lebanon Ford. 50K with Whipple. Stick or automatic. 300A.

 

[jboogie1289]

Nice. Now my father in law wants a white one. May have to call Lebanon Ford. 50K with Whipple. Stick or automatic. 300A.

This one was a Premium 401a Package, Non PP and A10.

 

[Cucurú]

This one was a Premium 401a Package, Non PP and A10.
[/QU Seems a bit too high for non PP. My sister in laws was only about 57 non PP. 401a also.

Sponsored