Patched My Fender Well Holes - DIY Instructions & Photos

[steveo1960]

Well. warmer weather is "sort of here" in Almost Canada....................time to quit slacking and get my DIYVan fender liner blocks installed.

Got almost 5400 miles on the GT (VERY few dirt/gravel miles), but I'm still planning on dropping the under trays to see how much road grit accumulated in them. And, to check the condition of the leading edges of my unit body pinch rails.

Won't be surprised to see some bare metal due to the road grit (if not; that's a plus!), so I'm planning on using this to cover any bare metal/rust that may be present.

https://www.amazon.com/Rust-Oleum-2...&hvlocphy=&hvtargid=pla-4583657826363376&th=1

I selected the rattle can version of this as the regular "brush it on can of it" is $30. vs $9. for the rattle can.

Thoughts, comments, advice, alternate product suggestions? TY!

Same here in NY.

Sponsored

 

[PonyKing]

I also came up with my own (I think) neat and most convenient available fix for this problem. Apart from removing a screw on the underside of the vehicle, the installation literally takes 10 seconds.
I recorded a short video showing the full installation process.
If you're interested you can hit me up as well!

 

[Cobrakit]

I also came up with my own (I think) neat and most convenient available fix for this problem. Apart from removing a screw on the underside of the vehicle, the installation literally takes 10 seconds.
I recorded a short video showing the full installation process.
If you're interested you can hit me up

Ok, so are you making these to sell ? How much ?

 

[VileKnight]

It’s amazing that Ford let this off the assembly without putting something over the gap, but thankfully we have an easy fix. Ordered my kit tonight!

 

[PonyKing]

Ok, so are you making these to sell ? How much ?

yes! I was thinking of 85 bucks, Since I'm shipping from Germany that already includes 25$ for insured shipping with tracking.

 

[8915GT]

I also came up with my own (I think) neat and most convenient available fix for this problem. Apart from removing a screw on the underside of the vehicle, the installation literally takes 10 seconds.
I recorded a short video showing the full installation process.
If you're interested you can hit me up as well!

Looks good, how is it holding up with only on screw holding it in?

 

[PonyKing]

It's not just the srew holding the part, there's also a groove at the top that slides into the actual wheel well which also holds it via friction. I had a 125 miles Autobahn ride yesterday which was reaally bumpy and it stayed in place.

 

[8915GT]

very nice, is there a website you are selling these on?

 

[Dzm13]

I also came up with my own (I think) neat and most convenient available fix for this problem. Apart from removing a screw on the underside of the vehicle, the installation literally takes 10 seconds.
I recorded a short video showing the full installation process.
If you're interested you can hit me up as well!

I think it's a brilliant, well executed solution, bravo! Sent you a PM

 

[PonyKing]

very nice, is there a website you are selling these on?

I don't have a website since me actual business is something completely different, but you can shoot me a DM.

Sponsored