Performance Package Brembo Brake Pads Dust

[Stang24]

They have ceramic coating for matte finishes

Sponsored

 

[roadpilot]

They have ceramic coating for matte finishes

The ceramic coating on my wheels was/is specifically for wheels - it's not the same product that's on the rest of the vehicle.

 

[Magic88]

DURA-COATING TECHNOLOGY, Dressing Total Tire Kit, XL Kit for 2-3 Car/Truck Kit “ All Inclusive Tire Shine, and Cleaner Kit for a Lasting Shine and Brilliant Finish - 32 Ounce Tire Cleaning Spray https://a.co/d/0dSwdIdm

Say goodbye to brown tires. The cleaning process is a chore, but compared to doing it to a set of 37" tires on my truck, a walk in the park, haha.

If you like a shiny tire, this is the way to go. Every three months or a curb check, wash with soap and water, apply a couple coats, back to slick shiny

This also ceramic coated wheels. Washed 4 days ago, 200 miles, all city driving

 

[DevilDog]

Thanks guys for your responses but I've been an amateur detailer for many years. I know how to wash/clean my wheels. I just don't want to have to clean them every day. My question was if anyone knew of dustless (ceramic?) brake pads. I guess I got spoiled with my previous BMW 3 series and it's ceramic pads.

I agree. The OEM pads give off a ton of dust. My wheels are filthy after a drive. I don't want to have to wipe mine down every day either. I put ceramic pads on my Z06's right away and eliminated about 90% of the brake dust.

 

[20ducks]

I agree. The OEM pads give off a ton of dust. My wheels are filthy after a drive. I don't want to have to wipe mine down every day either...

I couldn't agree with you more. See if this has any of your interest:

G-Loc Brake Compounds:

GS-1: The GS-1 compound is for high performance on the street. The compound provides great release and modulation while still being very rotor friendly. With the low dusting and low noise of this compound, you get lower maintenance and a more pleasant driving experience. Linear torque makes these pads very streetable without ABS intervention. Operating Range: Ambient-800°F.Recommended Uses: All street cars, towing or fleet vehicle. NOT recommended for ANY track use.

 

[Dave2013M3]

I couldn't agree with you more. See if this has any of your interest:

G-Loc Brake Compounds:

GS-1: The GS-1 compound is for high performance on the street. The compound provides great release and modulation while still being very rotor friendly. With the low dusting and low noise of this compound, you get lower maintenance and a more pleasant driving experience. Linear torque makes these pads very streetable without ABS intervention. Operating Range: Ambient-800°F.Recommended Uses: All street cars, towing or fleet vehicle. NOT recommended for ANY track use.

I thought the brake dust was bad on the PP brembos until I got the BMW G87 M2. I would give my left nut to have the brake dust of the PP Brembos.

 

[20ducks]

I also had my share of brake dust on Z4M, E46 M3, E63 M6, 335N's. I invested $ in EBC pads. Got fed up with the Munich boyz and left the kraut autos altogther.

 

[20ducks]

I contacted Brembo regarding reduced dust brake pads for the grabber 6 and 4 cylinder calipers...they have nothing regarding lower dust pads. So, gotta compile a list of potential suppliers to contact. Is my desperation showing?

 

[Bikeman315]

 

[Dave2013M3]

I also had my share of brake dust on Z4M, E46 M3, E63 M6, 335N's. I invested $ in EBC pads. Got fed up with the Munich boyz and left the kraut autos altogther.

I too have had numerous BMW M cars, from E46, E92 and now this G87 which gets the same brakes from the G80/2 M3/4. Its even beyond the previous M cars. A ten mile drive and it has a coat of cinnamon on them. I was going to try the EBC reds but a few folks didn't like the bite vs. the OEM pads, which not only dust like crazy but squeal as if you are in a Metro bus. I got the BMW M compund brakes (red calipers) and they squeal like a stuck pigs...but boy do they stop this car.

 

[DevilDog]

I contacted Brembo regarding reduced dust brake pads for the grabber 6 and 4 cylinder calipers...they have nothing regarding lower dust pads. So, gotta compile a list of potential suppliers to contact. Is my desperation showing?

I ordered PowerStop ceramic pads from Summit Racing a few weeks ago. They were backordered and won't be in for a few more weeks.

Sponsored