Search results

I looked with a flashlight just now and do not see anything like you described. I also would of noticed a loose part during my install as well.

That's my car and I really like the look and functionality.

Turn the screw counter clockwise a couple turns while applying upward pressure using a small pry tool to gently pop it out.

My Ford pass says my software update was last updated 12/19/24 to 10.1.0 but in the car it says it has 10.1.1 I'm not driving the car untill the weather gets a little better and hope the 2 sync at that time.

When you scuff sand the back of the patch material and then use the 2 part epoxy and firmly place the support blocks to press the piece onto the fender and let it cure and seal the edges.with black RTV.....it ain't ever falling off. Plus it looks tight and clean.

Good deal. They look exactly like the 20 I purchased but a little less expensive. Nice find.

I held off on towing for a spell. 🤣

Yes correct do not take it apart. Leave it un screwed 1/4 inch like it comes out of the box. That way the bottom 3 flaps are not spread out.

When one of the flaps break as in my case, they do not grip and hold the cowl cover snug. Here's a photo of a broken one. They have 3 flaps on each pin and when one breaks they no longer hold or grip.

Yes it is 2 pieces and is not made to be taken apart. As you can see when the clip is new out of the box it is ready to push into place and then you turn the top of the pin and since it has plastic threads it screws in and spreads the 3 plastic flaps to hold the cowl cover.

The pin screw clip is 2 pieces as you probably know. When inserting the clip both pieces going in from the top side of the cowl cover. The pin should look like this when inserted. Push it in and then turn the top with your finger. No need to do it tight. It sounds like maybe someone put the...

I have removed the plastic battery cover 3 times on my 2024 GT. Two of the Three OEM pin clip SCREW cowl retainers are broken. I found the exact Ford replacement pin screw clips on Amazon for $13.99 for 20 clips. They fit 👌 perfectly and have positive reviews. https://a.co/d/6DKsCwC

No rock guards flaps will cover it.

I had the clear bra put on right away. No chips here.

Ok it worked. I pulled the Neg. cable off the battery for 20 minutes. The spin cycle I have had for a month is now cleared. My updates are set to happen everyday at 1am so we will see. I got the 10.1.0 on Dec. 19th on my 2024 GT. Thank you for your help.

That's kinda what I figured. Winter has kept me from driving it and I ended up getting the flu for a week which turned into Bronchitis for another week. I just thought the spin cycle message was odd.

My car has been sitting for a month and my Ford pass said I needed to start the car for it to work. So I did 2 weeks ago. Ford pass then worked like it did when I first bought the car. When I sit in the car and start it and let if run for 15 minutes and it would not get updates 2 weeks ago...

Awesome set up.

I am retired and 64. I enjoy working on my cars like you and have little trust of the oil change jockeys at the dealership. I document the oil changes on the Ford app and keep my own paperwork as proof as well.

Can you provide a photo or link to your Amazon funnel. Thank 😊 you.