2024 Mustang FORScan List / Database / Spreadsheet (by Livinitup)

[So0_NaSTy]

Hello people. Anyway we can update the “common” tab to show how to change the Premium approach lighting to the DH Style? Everything past the Common tab looks like gibberish to me, have no clue how to read it. I have a Job 2 stang, unsure if that changes the lighting numbers.

Sponsored

 

[So0_NaSTy]

Also, is there anyway anyone knows of that you can change the interior screens animation to the DH style from the standard GT style? Unsure if this is a thing.

 

[smurfslayer]

Also, is there anyway anyone knows of that you can change the interior screens animation to the DH style from the standard GT style? Unsure if this is a thing.

in previous sync you could.

 

[So0_NaSTy]

in previous sync you could.

Ah. Sync 4 doesn’t allow it I guess.

 

[smurfslayer]

Not sure, I haven’t looked into it because I have MDH, so I’m fine with the animation.

 

[TXGT29]

After reading, reading, and more reading, I pulled the trigger on an adapter and ran my first session. Love all the changes made (even as minor as some of them are). Turned off all the alert sounds (door ajar, seat belt, etc.) as well as the seat belt splash screen. Updated the speedometer and constant gear display, turned on the WAL and updated the welcome lighting to DH configuration.

Does anyone know if there is a setting to have the doors unlock when approaching? Or only done via touch to door handles?

Also, was looking at updating the tire size so it's accurate, and found this in the BCM module. Was trying to understand if -01 is the front, and -02 is the rear (just making assumption here).

 

[roket]

After reading, reading, and more reading, I pulled the trigger on an adapter and ran my first session. Love all the changes made (even as minor as some of them are). Turned off all the alert sounds (door ajar, seat belt, etc.) as well as the seat belt splash screen. Updated the speedometer and constant gear display, turned on the WAL and updated the welcome lighting to DH configuration.

Does anyone know if there is a setting to have the doors unlock when approaching? Or only done via touch to door handles?

Also, was looking at updating the tire size so it's accurate, and found this in the BCM module. Was trying to understand if -01 is the front, and -02 is the rear (just making assumption here).

those are for the rear tires only. they are the hexadecimal version of the circumference of the rear tires in mm, and the first two digits go in -01, the last two go in -02.
or, if you dont want to do any guessing, you can use a tool i made at this link. you just input your rear tire size and it does all the work for you

 

[TXGT29]

those are for the rear tires only. they are the hexadecimal version of the circumference of the rear tires in mm, and the first two digits go in -01, the last two go in -02.
or, if you dont want to do any guessing, you can use a tool i made at this link. you just input your rear tire size and it does all the work for you

Thanks for this.

I was browsing more through the BCM module, and see a number of them that say (autounlock........) just unsure how to know if that's what my intentions are of unlocking just walking up to the car.

Thanks again

 

[So0_NaSTy]

After reading, reading, and more reading, I pulled the trigger on an adapter and ran my first session. Love all the changes made (even as minor as some of them are). Turned off all the alert sounds (door ajar, seat belt, etc.) as well as the seat belt splash screen. Updated the speedometer and constant gear display, turned on the WAL and updated the welcome lighting to DH configuration.

Does anyone know if there is a setting to have the doors unlock when approaching? Or only done via touch to door handles?

Also, was looking at updating the tire size so it's accurate, and found this in the BCM module. Was trying to understand if -01 is the front, and -02 is the rear (just making assumption here).

Hey, question. By constant gear display, do you mean you managed to show what gear you’re in at all times with the 10 speed auto? If so, how??? I’ve been dying to figure that out.

 

[TXGT29]

Hey, question. By constant gear display, do you mean you managed to show what gear you’re in at all times with the 10 speed auto? If so, how??? I’ve been dying to figure that out.

Yes, follow this:

 

[So0_NaSTy]

Yes, follow this:

Thanks!

 

[TXGT29]

So, not sure if this is anything or if I'm just making it up in my head. I did the change to the DH welcome lighting, but it seems like I have to get much closer to the car for it to go off.

Would any of this change cause a lower sensitivity for this? Just seems like i have to get right next to the car for it to acknowledge me now.

 

[TXGT29]

So, not sure if this is anything or if I'm just making it up in my head. I did the change to the DH welcome lighting, but it seems like I have to get much closer to the car for it to go off.

Would any of this change cause a lower sensitivity for this? Just seems like i have to get right next to the car for it to acknowledge me now.

Ok, so I think I was just an idiot and never realized the welcome lighting doesn't go on when you've used remote start......One of those make a change and expect something different that was never really there before.

That said, was reading through this thread again.....could someone explain a little more the changes to the tachometer and the different benefits of each of the options?

 

[roket]

Ok, so I think I was just an idiot and never realized the welcome lighting doesn't go on when you've used remote start......One of those make a change and expect something different that was never really there before.

That said, was reading through this thread again.....could someone explain a little more the changes to the tachometer and the different benefits of each of the options?

there really is no benefit to changing that value unless your vehicle has somehow swapped engines. i think the reduced low fuel DTE reminder makes it so that the vehicle will tell you sooner than 50 miles to E that fuel is low

 

[TXGT29]

there really is no benefit to changing that value unless your vehicle has somehow swapped engines. i think the reduced low fuel DTE reminder makes it so that the vehicle will tell you sooner than 50 miles to E that fuel is low

Ok, that's what I figured. Just thought since it was noted at start of this thread there may be more benefit.

Thanks

Sponsored