2025 mustang gt with performance package

[1hotboss]

I decided not to have the front license plate holes drilled into my bumper. What options are out there to attach my plate ie sto n sho

thanks

Sponsored

 

[noac]

Plates ruin the look of the car….Do Not put one on…..PoPo should leave you alone

 

[Joe_Stang]

I haven't had a front license plate since I bought the car a few months ago and I've never been pulled over. A front plate would look dumb wherever it would be put on the s650 bumper.

 

[abz]

Congratulations! Several off-the-shelf or DIY options discussed in these threads:

https://www.mustang7g.com/forums/threads/sto-n-sho-front-license-plate-holder.162833/page-2
https://www.mustang7g.com/forums/threads/front-license-plate-bracket-recommendations.161693/page-2
https://www.mustang7g.com/forums/th...front-license-plate-no-drilling.158159/page-2

 

[1hotboss]

Unfortunately I’m from Canada and front plates are required

 

[murciful]

Sto N Sho gets it done

 

[Sofa King]

Unfortunately I’m from Canada and front plates are required

Just put on the factory one... looks the best (centered), does not block the radar sensor, and actually does not make holes in the bumper (holes are in the grill).

 

[martin]

I have not put on a front plate to my 2024 GT convertible. In September I will be due for an inspection sticker . Will having no front plate complicate me passing that inspection ?

 

[Bikeman315]

Easy peasy. Had this on my ‘15 EB in New Jersey. Never had an issue. IMHO the Sto & Sho mounts to low so I decided against it.

https://ccmustangbrackets.com/products/2024-mustang

 

[Bikeman315]

I have not put on a front plate to my 2024 GT convertible. In September I will be due for an inspection sticker . Will having no front plate complicate me passing that inspection ?

If a front plate is required in your state, absolutely. Why would you think it would pass. That’s one of the pluses of the Craig’s bracket. The plate is easily removable and the bracket is virtually invisible.

https://ccmustangbrackets.com/products/2024-mustang

 

[Bikeman315]

Just put on the factory one... looks the best (centered), does not block the radar sensor, and actually does not make holes in the bumper (holes are in the grill).

Can you post a pic please?

 

[Djdoug4ever]

STONSHO.com No drilling and easy to remove/replace license plate from holder.

 

[Redback]

I'm in Canada too. Made my own for 10 bucks with a few parts from Home Depot. Zero modifications required, attached using existing hardware under your bumper.

 

[CDNV8S650]

Ordered my tow hook plate from ZL1 addons

Edit: Order was taking to long....9 months and already got the plates in advance, found 1 in transit same spec but color

 

[RaceRedder]

Ordered my tow hook plate from ZL1 addons

Its grabber blue not vapor blue haha

Sponsored