Does anyone make jack rails for the S650 convertible yet?

[TUnica]

I spoke with you several times & also included our manufacturing team - if it wasn't you, then it was Tom we spoke with to review the concern.

Actually you didn't, you jumped into a thread (Front inner wheel well issues) page 34. and made some statements. I asked then for someone to contact me which never happened. Same when I returned the rails - there were zero people from Steeda interested in discussing what my concerns were.
Sponsored

Sponsored

 

[BTL]

They are the same product, and yes, our team has the expertise to assist with your question - we did adjust longer bolts in the front only due to a change Ford made on the S650 k-member tab.

We've sold thousands of these across all platforms, including the S650, so you're in great hands with Steeda.

TJ

Well, I actually had to jack up my car this past weekend while installing some parts. The rails appeared to have worked perfectly. Can find any evidence that they flexed or dented even though they are not perfectly level with the ground. So far, very satisfied.

 

[TUnica]

Well, I actually had to jack up my car this past weekend while installing some parts. The rails appeared to have worked perfectly. Can find any evidence that they flexed or dented even though they are not perfectly level with the ground. So far, very satisfied.

That's good news, did you jack at the mid span?

 

[tj@steeda]

Actually you didn't, you jumped into a thread (Front inner wheel well issues) page 34. and made some statements. I asked then for someone to contact me which never happened. Same when I returned the rails - there were zero people from Steeda interested in discussing what my concerns were.
Sponsored

We spoke to another customer and felt the matter didn't need to be addressed further, as we spoke to another customer - we were confident in how to proceed.

If you want to discuss further - you can call us at 1800 950 0774 and ask for Matt


Best,

TJ

 

[BTL]

That's good news, did you jack at the mid span?

No, I didn't. I used a floor jack and positioned it toward the front of the rail. Did it on both sides. Again, no problems.

Sponsored