Finished the Whipple Installation all by myself :)

[Japeatr]

Took me roughly 18 hours to complete, but turned out great

Gen4 Coyote 5.0L Dark Horse
Lethal Performance Stage 2 Gen6 Whipple 3.0
3.75” pulley (13psi)
Dual Pass HD Race Intercooler
Dual Intercooler pumps
MMR Billet Oil Pump Gears/Crank Sprocket
MMR Lightweight Water Pump Pulley
170* Thermostat
Fuel + Fuel Pump Booster
VMP Carbon Intake
APR Carbon Fiber Air Box lids
APR Carbon Fiber Radiator Panel
UPR Oil Separator/Catch can
Borla Switchfire resonator delete
Factory Headers and Active Exhaust

Sponsored

 

[9secondko]

Dang. Great job. The carbon fiber look is killer too. Looks like a factory job.

 

[Paul's stable]

Took me roughly 18 hours to complete, but turned out great

Gen4 Coyote 5.0L Dark Horse
Lethal Performance Stage 2 Gen6 Whipple 3.0
3.75” pulley (13psi)
Dual Pass HD Race Intercooler
Dual Intercooler pumps
MMR Billet Oil Pump Gears/Crank Sprocket
MMR Lightweight Water Pump Pulley
170* Thermostat
Fuel + Fuel Pump Booster
VMP Carbon Intake
APR Carbon Fiber Air Box lids
APR Carbon Fiber Radiator Panel
UPR Oil Separator/Catch can
Borla Switchfire resonator delete
Factory Headers and Active Exhaust

The dealership installed my Whipple and yours look just as good as the dealer. Now go have some fun.

 

[Q6543]

Great job, i also DIY’d mine… took 3-4 hours a day throughout the week.. great work.

these cars are absolute monsters, i put a 3.5 pulley on and ran a high 9 without even trying.

 

[Stevan74]

Took me roughly 18 hours to complete, but turned out great

Gen4 Coyote 5.0L Dark Horse
Lethal Performance Stage 2 Gen6 Whipple 3.0
3.75” pulley (13psi)
Dual Pass HD Race Intercooler
Dual Intercooler pumps
MMR Billet Oil Pump Gears/Crank Sprocket
MMR Lightweight Water Pump Pulley
170* Thermostat
Fuel + Fuel Pump Booster
VMP Carbon Intake
APR Carbon Fiber Air Box lids
APR Carbon Fiber Radiator Panel
UPR Oil Separator/Catch can
Borla Switchfire resonator delete
Factory Headers and Active Exhaust

Awesome!!

 

[broncoboy22]

MAJOR props!! You did it right too enjoy!!

 

[MAT1955]

@Q6543 ..... you said it 100% these cars are absolute MONSTERS! The 2024 Mustang 5.0 is a monster masterpiece. As J of RSA (Racing Solutions America) said on the That Racing Channel video 1000HP mustang beats Lambos video posting....where else can you get an engine to (in his case twin turbo) run to almost 10K rpm and 1000HP. Kudos to Ford for what they have done. Yes we get a few paint drips or a some little issues but that 2024 5.0L base engine is a masterpiece THEN you can use it as a base to create a BEAST! that and and the R1080 of the 6 speed transmissions make up for ALL of that little $hit! IMO. We are the lucky few to be at the tail end of the production lives of these marvelous Mustang machines before the greenies outlaw them.

 

[SSuperDave]

Hats off to you! We do these at the dealership with lifts and all the right tools and they are a bitch even then. I can't imagine doing one at homes.

 

[tankcj]

Well done!

 

[Japeatr]

Hats off to you! We do these at the dealership with lifts and all the right tools and they are a bitch even then. I can't imagine doing one at homes.

a lift would have helped with the bumper for sure. if just doing a basic whipple install, an average home mechanic could do it in a weekend. saved me the $3,000 I was quoted.,

 

[roket]

this gives me inspiration to do the install myself when i eventually decide to order my supercharger. stage 2 doesnt come with a warranty anyways, so it doesnt hurt

 

[DevilDog]

Very impressive. Car looks awesome.

 

[Renntech]

Very impressive, looks absolutely killer.
How much total wrenching/auto-mechanical experience did you have before you approached a task like this one?

 

[Japeatr]

Very impressive, looks absolutely killer.
How much total wrenching/auto-mechanical experience did you have before you approached a task like this one?

im 40, been wrenching on cars since high school, was an auto tech when in college. have installed several turbo/superchargers over the years (mostly 4 cyl cars), plenty of tools at the house.....BUT Whipples instructions were very good, and a few videos online helped

 

[Sf22giants]

Who’s guide/instructions did you reference for the oil pump gears?

Sponsored