First Runs of 2025

[TexVol]

Finally, the weather has cleaned itself up enough to get back on the track. After a couple of short lived track visits at the end of last year and a few small mods over winter it was time to try again. Here’s to a good, clean and fun year in 2025!!

Sponsored

 

[Q6543]

Awesome! I’ll be out in the next few weeks hopefully, just want to do an oil change 1st

what size pulley and fuel blend on that pass?

 

[TexVol]

Awesome! I’ll be out in the next few weeks hopefully, just want to do an oil change 1st

what size pulley and fuel blend on that pass?

3.250 pulley and Renegade RM 109 race fuel.

 

[A.alansari]

man you can't get enough of that coyote sound

 

[MegaMan]

Finally, the weather has cleaned itself up enough to get back on the track. After a couple of short lived track visits at the end of last year and a few small mods over winter it was time to try again. Here’s to a good, clean and fun year in 2025!!

Man that’s cool! I wanna do that lol

 

[Cucurú]

Finally, the weather has cleaned itself up enough to get back on the track. After a couple of short lived track visits at the end of last year and a few small mods over winter it was time to try again. Here’s to a good, clean and fun year in 2025!!

Wow! That's real good. Can't wait to see my daughter at it. But we must wait to go a few mods. SC, Borla axel backs, short throw shifter. At least the SC.

 

[broncoboy22]

Very niiiiiiiiccceee!!!

 

[Paul's stable]

Finally, the weather has cleaned itself up enough to get back on the track. After a couple of short lived track visits at the end of last year and a few small mods over winter it was time to try again. Here’s to a good, clean and fun year in 2025!!

You hooked great! What tires are you running MT 305 x 18? Are your rim's 11 with what back spacing? I want to order a set for my Dark Horse but I can't find out what the correct measurements you hear a lot of different sizes and back spacing on the interweb. If you could please send the info on your tire and rim set up it would be much appreciated thank you.

 

[TexVol]

You hooked great! What tires are you running MT 305 x 18? Are your rim's 11 with what back spacing? I want to order a set for my Dark Horse but I can't find out what the correct measurements you hear a lot of different sizes and back spacing on the interweb. If you could please send the info on your tire and rim set up it would be much appreciated thank you.

My fronts are Weld Ventura 20x5 rims with Bridgestone Ecopia 175/55 R20 tires. My rears are Weld Ventura Beadlocks 18x10 with Mickey Thompson ET Street R Drag Radial P305/45 R18, no spacers. Hope that helps.

 

[TexVol]

My fronts are Weld Ventura 20x5 rims with Bridgestone Ecopia 175/55 R20 tires. My rears are Weld Ventura Beadlocks 18x10 with Mickey Thompson ET Street R Drag Radial P305/45 R18, no spacers. Hope that helps.

A caveat….you might want to shorten the sidewall height a little on the fronts, mine rub a tiny bit at end of track when coming down and hitting a bump. Has never hurt anything, just a very minor rub here and there at the end of the track.

 

[Paul's stable]

My fronts are Weld Ventura 20x5 rims with Bridgestone Ecopia 175/55 R20 tires. My rears are Weld Ventura Beadlocks 18x10 with Mickey Thompson ET Street R Drag Radial P305/45 R18, no spacers. Hope that helps.

Thank you very much one last question what was the backspace on the rims they need that for order info. Thanks again.

 

[TexVol]

Thank you very much one last question what was the backspace on the rims they need that for order info. Thanks again.

Here is a copy/paste from the original emails where I ordered from Beefcake Racing last year……does this help…

 

[TexVol]

Sorry, that copy/paste was only the front. Here’s the rear wheels….

Sponsored