Messed up exhaust tips

[Notavette]

Can someone send me photos of their unmolested active exhaust tips? Had an x-pipe installed last week and they missed the mark on where the exhaust tips should be. I need examples of what it should look like so they get it right this time.

Sponsored

 

[Timry2]

I installed an H pipe doesn’t look much different than yours. Hope these help.

 

[jboogie1289]

If you mean protruding out more then yes. I had that as well but took it back to the Exhaust shop because of a rubbing sound beneath the car and the Owner corrected that, explained how when in Quiet Mode that the valves have a hard time remaining closed with the pressure pushing out. These are the before pictures …

I’ll have to take some more recent pics after his Adjustments.

 

[Notavette]

I just found This on YouTube. This is how they should look.

 

[Wraith6668]

I installed an H-Pipe myself and one side droops a little. I tried many times to loosen and push it up but keeps creeping back down. I gave up and will wait till I get a catback for it to be corrected.

 

[ChitownStang]

I installed an H-Pipe myself and one side droops a little. I tried many times to loosen and push it up but keeps creeping back down. I gave up and will wait till I get a catback for it to be corrected.

Loosen the butt clamps connecting the h-pipe at rear. Use a 30” 2x4 and floor jack to relieve pipes rear of H-pipe.
Twist the tips so they are straight, tighten back up.
this is why they look like they are sagging.
The hangers are welded on the mufflers so height can’t be adjusted, it’s the twist

 

[Wraith6668]

I hear you with that. I've puahed them up and tightened them and they were looking perfect but after a few rides they start to droop back down. The clamp just doesn't hold them good

 

[IFFV68]

I installed an H-Pipe myself and one side droops a little. I tried many times to loosen and push it up but keeps creeping back down. I gave up and will wait till I get a catback for it to be corrected.

I’m a little old fashion.
I think I’ll leave mine like it came from the Factory?
I know it will look like everyone else.
This doesn’t represent Union or Management..

 

[coult]

These will permanently keep the mufflers from rotating:

https://www.theboostlab.com/heavy-d...t-sleeve-butt-joint-clamp-for-2-5-o-d-tubing/

Sponsored