My Color keeps changing on it's own!

[Lakersfreak]

Anyone else notice that every 10 drives or so, My Color automatically changes to the ugly orange colors. Does this happen to anyone else or am I doing something to trigger the change?

Sponsored

 

[Lakersfreak]

Is it the Blue Ember the color you are referring to? If so, for the very short time I've rented that specific color, I've noting it tends to get slightly orangish/brownish when dirty.

I was referring to the interior My Color options for the two screens, not the exterior color.

 

[Pmamba]

Mine has changed once and it was after one of the updates. Has not done it since then.

Maybe try the BMS reset? This fixed some other random issues I was having.

 

[2016 GT/CS Laila]

Is your setup profile saved to your key fob?

 

[JAM486HP]

Yep, happens occasionally... I just tap the profile 1 button on the door panel and back to norm

 

[Farmer Fran]

Mine did it for the first time a couple days back

 

[Lakersfreak]

Is your setup profile saved to your key fob?

Not sure. How can I check?

 

[Lakersfreak]

Yep, happens occasionally... I just tap the profile 1 button on the door panel and back to norm

Didn't know My Color is also part of this. Maybe that's my issue!

 

[JAM486HP]

Didn't know My Color is also part of this. Maybe that's my issue!

Yeah it saves to your custom profile. Adjust my seats, mirrors, lighting etc... Press and hold 1 for three seconds... Saved! Anytime it acts up, just press 1, fixed

 

[Wiley Marmot]

Mine has changed once and it was after one of the updates. Has not done it since then.

Maybe try the BMS reset? This fixed some other random issues I was having.

Mine did too; after the update that gave us the older/classic dash/gauge options

 

[JAM486HP]

Not sure. How can I check?

1. With the ignition on, move the memory
positions to the preferred positions.
2. Press and hold the preferred preset
button for about five seconds. A tone
sounds after about two seconds.
Continue holding until you hear a
second tone.
3. Within three seconds, press the lock
button on the remote control you are
linking

 

[smurfslayer]

also, when you shut down, the screen reverts to the “default” ugly orange

 

[Lakersfreak]

1. With the ignition on, move the memory
positions to the preferred positions.
2. Press and hold the preferred preset
button for about five seconds. A tone
sounds after about two seconds.
Continue holding until you hear a
second tone.
3. Within three seconds, press the lock
button on the remote control you are
linking

This did not work. No second tone. But I did go into setting and it days my keyfob is connected to my profile.

 

[A.alansari]

Had same problem
I deleted my profile and didn't create new one and no issues at all now

 

[allenouo]

also, when you shut down, the screen reverts to the “default” ugly orange

I thought that's me messed something up in Forscan, looks like that's normal

Sponsored