A.alansari
Well-Known Member
this is another option from GPT incase the first one didn't work
Step 1: Modify Left and Right Headlamp Modules (LDCMA + LDCMB)
In FORScan:
- Module: LDCMA (Left Headlamp Control)
- 6F6-01-07: Change from 9504 to 5504
- 6F6-01-08: Change from 3F00 to 0F00
- Module: LDCMB (Right Headlamp Control)
- 6F7-01-07: Change from 9504 to 5504
- 6F7-01-08: Change from 3F00 to 0F00
Meaning:
- Assigns amber LEDs to DRL1/Park Control (Value '5').
Step 2: Modify BCM (Body Control Module)
In FORScan:
- Module: BCM (Body Control)
- Go to As-Built format
- Locate address 726-27-01 (Position Lamp Activation Strategy).
Edit:
- Set first nibble (or use FORScan dropdown if available) to enable:
"Position Lamps Activation with Ignition ON"
Typical change:
- 726-27-01 xxxx xxxx 01 --> means position lamps always ON with ignition.
Note:
- Some BCM versions may label this differently, but FORScan usually shows it clearly.
Step 3: Finalize and Test
Step 1: Modify Left and Right Headlamp Modules (LDCMA + LDCMB)
In FORScan:
- Module: LDCMA (Left Headlamp Control)
- 6F6-01-07: Change from 9504 to 5504
- 6F6-01-08: Change from 3F00 to 0F00
- Module: LDCMB (Right Headlamp Control)
- 6F7-01-07: Change from 9504 to 5504
- 6F7-01-08: Change from 3F00 to 0F00
Meaning:
- Assigns amber LEDs to DRL1/Park Control (Value '5').
Step 2: Modify BCM (Body Control Module)
In FORScan:
- Module: BCM (Body Control)
- Go to As-Built format
- Locate address 726-27-01 (Position Lamp Activation Strategy).
Edit:
- Set first nibble (or use FORScan dropdown if available) to enable:
"Position Lamps Activation with Ignition ON"
Typical change:
- 726-27-01 xxxx xxxx 01 --> means position lamps always ON with ignition.
Note:
- Some BCM versions may label this differently, but FORScan usually shows it clearly.
Step 3: Finalize and Test
Sponsored