• Welcome to Mustang7G!

    If you're joining us from Mustang6G, then you may already have an account here!

    As long as you were registered on Mustang6G as of March 10, 2021 or earlier, then you can simply login here with the same username and password!

B&O 10" sub replacement?

MCS

Well-Known Member
Joined
Aug 17, 2022
Threads
25
Messages
803
Reaction score
826
Location
SW Ontario
Vehicle(s)
'24 DH Premium
No. But you can drill new holes rather than cutting the speaker if you prefer. Post #25 details possible speakers but none share the exact same holes. I drilled new holes which worked fine.
Thanks. I’ll check out that post. In fact I’m going to need to go through this thread more thoroughly to get a parts and tools shopping list together. Those connectors look like I’ll need a soldering gun lol
Sponsored

 

Gregs24

Well-Known Member
Joined
Aug 31, 2018
Threads
8
Messages
1,761
Reaction score
786
Location
Wiltshire UK & Charente FR
Vehicle(s)
Mustang V8 GT, Ford Kuga PHEV
Thanks. I’ll check out that post. In fact I’m going to need to go through this thread more thoroughly to get a parts and tools shopping list together. Those connectors look like I’ll need a soldering gun lol
You don't need the connectors, you can just chop off the plugs inside the sub enclosure and connect the wires directly to the sub. The Pioneer one is designed to take bare wires. The thread on the S550 forum referenced above has all the details
 

Honor

Member
Joined
Mar 1, 2025
Threads
1
Messages
18
Reaction score
2
Location
Korea
Vehicle(s)
S650
Can you confirm that my wiring is correct?
S650 Mustang B&O 10" sub replacement? KakaoTalk_20250302_094519669


Yesterday, I've replaced subwoofer with TS-A250D4 with above wiring, but it is not worked.
(No sound, no vibration)
If above wiring is not correct, please let me know correct one, if you don't mind.
It is serious for me.
 

Gregs24

Well-Known Member
Joined
Aug 31, 2018
Threads
8
Messages
1,761
Reaction score
786
Location
Wiltshire UK & Charente FR
Vehicle(s)
Mustang V8 GT, Ford Kuga PHEV
The black and purple wires are negative, the green and yellow wires are positive
Can you confirm that my wiring is correct?
KakaoTalk_20250302_094519669.jpg


Yesterday, I've replaced subwoofer with TS-A250D4 with above wiring, but it is not worked.
(No sound, no vibration)
If above wiring is not correct, please let me know correct one, if you don't mind.
It is serious for me.
Looks correct - you did reconnect the plug at the back of the sub when you put it back in?
 

Honor

Member
Joined
Mar 1, 2025
Threads
1
Messages
18
Reaction score
2
Location
Korea
Vehicle(s)
S650
The black and purple wires are negative, the green and yellow wires are positive

Looks correct - you did reconnect the plug at the back of the sub when you put it back in?
The black and purple wires are negative, the green and yellow wires are positive

Looks correct - you did reconnect the plug at the back of the sub when you put it back in?
Just before, it was solved.
The problem was the volume.
When I volumed up to mid. Sub woofoer started to vibrate.
Thank you for your kind reply. Thank you so much.
Sponsored

 
 








Top