Help! SPOILER FOAM 3M?

[1crazymach]

I recently purchased a Dark Horse Handling Pack replica spoiler for my standard Dark Horse. I peeled off my spoiler, but after putting this other spoiler together, I am not a fan of it. It has too many imperfections and is nowhere near the quality of the factory spoiler. What I'm looking for, and I've searched for, is the 3M tape/foam that comes on the standard Dark Horse. I tried other 3M tape, but it doesn't look right and sticks out. Any help with these OEM part numbers would be great. Thank you.

Sponsored

 

[VTX CHF]

3m vhb, you can get it in different widths and lengths. Works great and really holds.

 

[nashbridges]

Wait is the stock Dark Horse spoiler just 3m mounted on the car without bolts?

 

[spedy7]

3m vhb, you can get it in different widths and lengths. Works great and really holds.

This or the "trim/moulding" tape work well. Make sure you clean the areas of old tape well!

Wait is the stock Dark Horse spoiler just 3m mounted on the car without bolts?

If it has an actual spoiler, should have double sided tape for the lower moulding and bolts at the ends of the trunk lid. Cars without the blade "spoiler" or an actual spoiler just get taped to the trunk lid...very stupid engineering idea IMO.

 

[snakeyes]

If you think there is any wax or ceramic coating on the area you want to apply the tape use a product called GOOF OFF, then alcohol, then adhesion promoter, then 3M VHB tape - that will do it ... make sure you do your best not to touch the exposed tape surface, use an exacto razor to seperate the red tape from the sticky side...

Sponsored