Recaro seat seat belt holder loop

[pecco1988]

I have the recaros and every single time I go to put my seat belt on. It comes out of the little loop holding it. Has any1 come up with a solution or a product to hold that in place. I don't want to use tape.

Sponsored

 

[smurfslayer]

#Metoo

I just reseat the seat belt in the seat belt ‘guide’ when I get out.

 

[RLE55]

Try a 4 or 6 point harness...the Recaro's like them best. And, they keep your ass in the seat better.

 

[R3tro GT]

I gave up trying to use them. To much of a pain.

 

[Paul's stable]

I have the recaros and every single time I go to put my seat belt on. It comes out of the little loop holding it. Has any1 come up with a solution or a product to hold that in place. I don't want to use tape.

I really have never noticed if I use them. I do know that if I put the passenger window down and go fast the seat belt makes a hell of a noise as it flaps around.

 

[thereatthebeginning]

Try a 4 or 6 point harness...the Recaro's like then best. And, they keep you ass in the seat better.

Harness recommendation for a 2025 GT Premium PP?

 

[RLE55]

Harness recommendation for a 2025 GT Premium PP?

https://www.schrothracing.com/products
Ran Sparco 4-point for about 5 years, switched over to Schroth 6-point Profi 3x2 when I switched racing seats to Sparco Pro ADV QRT, great set up.

 

[Sofa King]

#Metoo

I just reseat the seat belt in the seat belt ‘guide’ when I get out.

That...

I gave up trying to use them. To much of a pain.

Or that. Lol.

 

[Ytsejam]

There is an etsy store that sells a guide hook that replaces the stock guide cover. I helped my mother install it this weekend. The only downside I can think of is that it may be difficult to remove the seatbelt from the guide once it's installed.

https://www.etsy.com/listing/1669549806/ford-mustang-dark-horse-seat-belt-guide?ref=share_v4_lx

 

[pecco1988]

There is an etsy store that sells a guide hook that replaces the stock guide cover. I helped my mother install it this weekend. The only downside I can think of is that it may be difficult to remove the seatbelt from the guide once it's installed.

https://www.etsy.com/listing/1669549806/ford-mustang-dark-horse-seat-belt-guide?ref=share_v4_lx

How hard was the install? That looks like a thing id be interested in.

 

[bptheo]

How hard was the install? That looks like a thing id be interested in.

I installed on my DH, very easy install, just pop off the plastic cap covering the screw and this screws on top. After 1mo, it works pretty well. There is still room at the top if you need to get the belt out you don't have to remove the unit.

 

[Ytsejam]

Agreed - the install wasn't bad. The most difficult part was popping off the plastic cover. I don't have plastic pry tools so I had to use a screwdriver and push from the other side. I ended up breaking a non-essential clip on each cover but that may be due to the cold. I did it on a 30 degree day.

 

[bptheo]

For those interested in seeing the Etsy 3D-printed seatbelt holder installed, here are 2 pics. The second one with the red oval shows the gap where, if needed, you can slip the seatbelt out without holder removal.

-Brian

 

[GrabThatBlue]

It was maybe a better design if they made it a clip, so it would be easier to remove the seatbelt from that position.

 

[pecco1988]

For the guys that bought that seat belt guide off of Etsy. Does it feel flimsy? Is it good quality. I see it's 3d printed in was trying to find a print file for it but can't. So now I might just buy it. Is the quality good?

Sponsored