2024 Mustang FORScan List / Database / Spreadsheet (by Livinitup)

[erasat]

APIM
7D0-05-01 2186 xxxx xx--
7D0-09-02 xxxx x500 xD--

IPC
720-03-01 x1xx xxxx xx--
720-09-01 xxxx xxxx 9x--

IPMA
706-01-01 xx4x xxxx xx--
706-02-01 6xxx xxxx xx--

After changing all the lines in the 3 modules, go to the wrench icon and reboot the modules one by one IPC - IPMA - APIM.

Good luck and let me know if it works. If not, than probably there is no hardware in your car that can make this work.

The good news is that by doing this changes it enabled the Speed Limits Sign and the menu but I'm limited right now to test it in a normal road, Street or Highway, just inside the complex where I live that has a couple of non typical speed limit signs it didn't pick it up, but again, these signs are not the regular official ones, they are a little smaller and more for private use than official government use. So I'll need to wait until I can go out maybe tomorrow afternoon, I can't try it in the morning.

Anyways, thanks a lot for your help and patience, I'm very grateful. Just 2 things. If it doesn't work, if it never detects a sign, how can I turn it off, do you recommend me to put all the changes back as they were before or is there just a simple change that I can do for that?

Second, as you can see in the pictures I took, the sign is clearly not centered with the above info, the speedometer at least not in MPH, is this something that it's adjusted with one of those changes or is this non centered icon is a general "issue"? I know this last one sounds picky but just want to be sure that if it finally works, that it can look good also on the console.

Thank you.

Sponsored

 

[GrabThatBlue]

The good news is that by doing this changes it enabled the Speed Limits Sign and the menu but I'm limited right now to test it in a normal road, Street or Highway, just inside the complex where I live that has a couple of non typical speed limit signs it didn't pick it up, but again, these signs are not the regular official ones, they are a little smaller and more for private use than official government use. So I'll need to wait until I can go out maybe tomorrow afternoon, I can't try it in the morning.

Anyways, thanks a lot for your help and patience, I'm very grateful. Just 2 things. If it doesn't work, if it never detects a sign, how can I turn it off, do you recommend me to put all the changes back as they were before or is there just a simple change that I can do for that?

Second, as you can see in the pictures I took, the sign is clearly not centered with the above info, the speedometer at least not in MPH, is this something that it's adjusted with one of those changes or is this non centered icon is a general "issue"? I know this last one sounds picky but just want to be sure that if it finally works, that it can look good also on the console.

Thank you.

Okay cool, let's hope your car has the hardware for it to read the sign.
Yeah, your speed limit sign looks a bit to the left. No idea why.
Keep us updated.

 

[erasat]

Okay cool, let's hope your car has the hardware for it to read the sign.
Yeah, your speed limit sign looks a bit to the left. No idea why.
Keep us updated.

Ok so I assume yours and the others with this working from factory is centered under the Speedometer? Well, let's see if it works with a regular sign, I hope so. But in case it doesn't, what do you recommend me, to put everything back as it was or maybe just one of those changes is the one that can turn it on and off?

 

[GrabThatBlue]

Ok so I assume yours and the others with this working from factory is centered under the Speedometer? Well, let's see if it works with a regular sign, I hope so. But in case it doesn't, what do you recommend me, to put everything back as it was or maybe just one of those changes is the one that can turn it on and off?

Yes, put everything back to the values you had.
That's the best to keep your car clear from mistakes.

This is how mine was. It was centered.
But I changed my sign to Europe now.

 

[erasat]

Yes, put everything back to the values you had.
That's the best to keep your car clear from mistakes.

This is how mine was. It was centered.
But I changed my sign to Europe now.

Yes, it looked centered before and now in your Europe signs I can also see it a little bit to the left also, so it seems that's the way it works after a work is done with the lines of codes

 

[GrabThatBlue]

Yes, it looked centered before and now in your Europe signs I can also see it a little bit to the left also, so it seems that's the way it works after a work is done with the lines of codes

The Europe sign is normal like that. It's on all Mustangs.

 

[GrabThatBlue]

@erasat I scrolled on my menu but couldn't find the menu you made a picture of that says speed sign recognition. Where is that menu hidden under?

 

[erasat]

@erasat I scrolled on my menu but couldn't find the menu you made a picture of that says speed sign recognition. Where is that menu hidden under?

It is under Features- Driver Assistance and there I can see Speed Sign Recognition.

 

[GrabThatBlue]

It is under Features- Driver Assistance and there I can see Speed Sign Recognition.

Okay thanks. I'm going to check again but I don't think I have that lol. But it's nothing that special in the menu. Have to find out what happened to give that menu. Cause mine works, just don't have the menu.

 

[erasat]

Okay cool, let's hope your car has the hardware for it to read the sign.
Yeah, your speed limit sign looks a bit to the left. No idea why.
Keep us updated.

Now reading the User Manual, it always mentions that the Speed Signs may not work fine if the Map Data is outdated, or some other Map Data issues, so the big question is of this will only work in cars with Navigation units or if somebody with Navigation has this working?

 

[sky5oh]

APIM
7D0-05-01 2186 xxxx xx--
7D0-09-02 xxxx x500 xD--

IPC
720-03-01 x1xx xxxx xx--
720-09-01 xxxx xxxx 9x--

IPMA
706-01-01 xx4x xxxx xx--
706-02-01 6xxx xxxx xx--

After changing all the lines in the 3 modules, go to the wrench icon and reboot the modules one by one IPC - IPMA - APIM.

Good luck and let me know if it works. If not, than probably there is no hardware in your car that can make this work.

It worked thank you!! It’s absolutely wild that ford locked that way , now I highly doubt my last question is possible, but are we able to enable the advance lane keep assist even with us not having the buttons?

 

[erasat]

It worked thank you!! It’s absolutely wild that ford locked that way , now I highly doubt my last question is possible, but are we able to enable the advance lane keep assist even with us not having the buttons?

So do you also have a 301 group model, I mean a Non Premium no Navigation model like mine? If so, then I hope like also works.

 

[sky5oh]

So do you also have a 301 group model, I mean a Non Premium no Navigation model like mine? If so, then I hope like also works.

Yeah mines 301A with no navigation

 

[GrabThatBlue]

Now reading the User Manual, it always mentions that the Spies Signs may not work fine if tye Map Data is outdated, or some.otger Map Data issues, so the big question is of this will only work in cars with Navigation units or if somebody with Navigation has this working?

Speed sign recognition is working with the front camera. But yes, it can also work with navigation data, but that is not accurate.

 

[GrabThatBlue]

It worked thank you!! It’s absolutely wild that ford locked that way , now I highly doubt my last question is possible, but are we able to enable the advance lane keep assist even with us not having the buttons?

I' happy that I could help.
Without buttons enabling that I don't know. You might have to buy a new wheel.

Sponsored