Steeda Stop the Hop Kit

[jexsk]

Looking at ordering the Steeda Stop the Hop street kit but before I did I wanted to see if anyone has already done this and their impressions. Noticed improvements under hard acceleration, chassis feel when cornering etc.

Sponsored

 

[Q6543]

I just did the bushings and locators and it work’s excellent!

small but noteworthy difference of the IRS being more “tied in” to the car.

I should’ve done it the same time as springs.

 

[tj@steeda]

Yes - these are proven and you will be very happy with the results. Let me know if I can put you in contact with our build team support your purchase decision - happy to help!

TJ

 

[jexsk]

Thanks, I ended up ordering it. I’ll post back once I get it installed

 

[tj@steeda]

Thanks, I ended up ordering it. I’ll post back once I get it installed

You won't be disappointed!

 

[jexsk]

Just got this installed and wow did this make a difference. Haven’t noticed hop on the pulls I’ve done and the front end stays straight as opposed to hunting for pedestrians lol Highly recommend and would definitely add to any future Mustangs.

Installation was straightforward with the exception of two things.

The two piece bushing on the rear was a real PITA. CJ Pony Parts had a good video on it and recommended lubing and using a screwdriver to help make the turn but it was still a pain.

Lastly on the driver side to remove the rear bolt it was right above the exhaust and I couldn’t get my wrench in there no matter which way extension I used. I finally ended up unbolting the exhaust mount near the tips so I could wiggle it out of the way.

 

[tj@steeda]

Thank you for the feedback!

Glad you were able to get everything installed

TJ

 

[CT22]

@Steeda Tech JohnC @SteedaTech @Steeda UK

I am about to install your Stop the Hope Starter kit and I cannot find PDF instructions anywhere on your site like other products.

Please attach those instructions here asap. I only have the lift available today to me. I can't believe it's not readily available on your webpage. Thanks!

 

[dusman59]

I believe there is a video.

 

[jexsk]

@Steeda Tech JohnC @SteedaTech @Steeda UK

I am about to install your Stop the Hope Starter kit and I cannot find PDF instructions anywhere on your site like other products.

Please attach those instructions here asap. I only have the lift available today to me. I can't believe it's not readily available on your webpage. Thanks!
[/QUOTE

So the instructions aren’t on the site for the kit but they are on there for each individual component in the kit. A little bit of a pain they’re not in one spot

 

[jexsk]

I believe there is a video.

Yeah the videos were pretty helpful

 

[CT22]

So the instructions aren’t on the site for the kit but they are on there for each individual component in the kit. A little bit of a pain they’re not in one spot

Thank you! I found them individually. Good idea. Still can't believe they don't have wholistic ones for the kits.

 

[tj@steeda]

We have individual ones listed under each product page and installation videos on complete kit installations.

Best,

TJ

Sponsored