Steeda Lowered - Sport / Minimum / Dual Rate Springs!

[tj@steeda]

More eye candy

Sponsored

 

[TXGT29]

Steeda progressive springs with Steeda front camber plates and Steeda 1" spacers all around.

Still trying to confirm best alignment specs to use with this setup, or if I should just go with S550 specs. If anyone can confirm, that would be great.

 

[RJV15]

Hows the ride quality?

 

[TXGT29]

Hows the ride quality?

Just fine to me honestly. Not harsh in any way. I'm used to lowered vehicles. Feel like it corners better between springs and wider stance. At least on standard street driving.

 

[timd38]

About how many hours should it take to change the springs out? Thanks!

 

[TXGT29]

About how many hours should it take to change the springs out? Thanks!

TBH, I had a guy do it for me. Was charged 4 hours to swap out springs, install camber plates, and give a good initial alignment setting.

 

[Q6543]

About how many hours should it take to change the springs out? Thanks!

the 1st spring took me a long time to get done.
All the mechanical stuff was fast and went smooth but the bench work of getting the darn spring compressed enough was a hell of a fight.
The 1st rear spring took me a long time to get out too.
Here are the tips.

after trying to use part store rental compressors I finally just went to harbor freight and spent 100 bucks on their clamshell compressor.

2nd on the rear I had to use a long 2x4 to be able to pry the rear subframe enough.

I did it all by myself but a good friend would be worth the help.

 

[timd38]

Thanks!

 

[Supra Killer]

I'm a little torn between the "min. drop" and the "sport springs". Ideally, I'd like the look of the car to be lower but not obviously 'aftermarket low'. If I didn't know, I'd like to look at it and think "did Ford lower the car like that with the performance pack?"

 

[Supra Killer]

Are these the Sport springs (SKU: 555 8242)? Looks great, any spacers used here?

More eye candy

 

[tj@steeda]

No spacers -


MagneRide Sport Lowering Springs (2015-2024)

https://www.steeda.com/steeda-555-8242-s550-magneride-sport-lowering-springs

555-8242

Front Drop: 0.8125” / Rear Drop: 0.8125”

 

[rockstar B]

Can stock non-PP dampers handle the Progressives? I've read some S550 reviews where people said they aren't a good match.

 

[CGNpony86]

anyone install minimum drops springs yet?

 

[tj@steeda]

Just looked on our Facebook S650 Page - discussions are continuing on about them. Is there a question you have regarding the minimum drop vs. the Progressives?

 

[highvoltage]

Can stock non-PP dampers handle the Progressives? I've read some S550 reviews where people said they aren't a good match.

where have you seen that? I have seen many running them on FB S650 pages and are happy

Sponsored