2024 Mustang FORScan List / Database / Spreadsheet (by Livinitup)

[GrabThatBlue]

here is my car from Middle East not sure if it will help

Shokran jazilan. This will help for a couple of things at least. Thanks,.

Sponsored

 

[erasat]

Here you can see my camera

I just took this picture and I don't know, this may be a camera, I'm trying to compare it with this picture of yours but they look different, just don't know if it's just the photo's perspective and focus.

Anyways, I will try to check again all the code I changed a couple of weeks ago via ForScan to see what it does now, but I'm pretty sure I turned on everything I saw related to Traffic sign I don't think there's something about speed limits.

 

[GrabThatBlue]

I just took this picture and I don't know, this may be a camera, I'm trying to compare it with this picture of yours but they look different, just don't know if it's just the photo's perspective and focus.

Anyways, I will try to check again all the code I changed a couple of weeks ago via ForScan to see what it does now, but I'm pretty sure I turned on everything I saw related to Traffic sign I don't think there's something about speed limits.

I can see you have a camera, but I can also see that it looks different than my picture.
It could be that there are different type of camera's used on the Mustang based on the trim.
The only way to find out is to change the settings and see if TSR works.

 

[erasat]

I can see you have a camera, but I can also see that it looks different than my picture.
It could be that there are different type of camera's used on the Mustang based on the trim.
The only way to find out is to change the settings and see if TSR works.

Do you have photos or your working APIM code with you? In that module the 7D0-05-01 in the Excel table shows 2 values, 0 for DSLIHMI for Speed Limit in HMI or 2 for DSLIHMI Speed Limit not in HMI (Traffic Sign Recognition) I have no idea what HMI means and I can't make any sense on which one of those 2 to use, if it just be changed.

In the HCM module, 734-05-01 has 3 options, 0 for SLME Disable, 1 for Enable or 2 for SLME Traffic sign deflate ON. The same, I don't know what SLME means so don't know which one to use.

 

[GrabThatBlue]

Do you have photos or your working APIM code with you? In that module the 7D0-05-01 in the Excel table shows 2 values, 0 for DSLIHMI for Speed Limit in HMI or 2 for DSLIHMI Speed Limit not in HMI (Traffic Sign Recognition) I have no idea what HMI means and I can't make any sense on which one of those 2 to use, if it just be changed.

In the HCM module, 734-05-01 has 3 options, 0 for SLME Disable, 1 for Enable or 2 for SLME Traffic sign deflate ON. The same, I don't know what SLME means so don't know which one to use.

Please send me all the lines that you changed trying to make the TSR function so I can have an overview of what you did. Then I can assist you step by step what to do. Otherwise it will be a jungle of loose information.

 

[erasat]

Please send me all the lines that you changed trying to make the TSR function so I can have an overview of what you did. Then I can assist you step by step what to do. Otherwise it will be a jungle of loose information.

I just tried again, doing what I've done before, I changed all the Codes where shows any info about Traffic Sign using the ForScan Database Worksheet of this thread. Just like before, no Traffic Sign icon on Dashboard but this time I just realized something I didn't the last time, by doing this I lost the Directional Reverse lines. And this time I couldn't find any Menu with the options as before, the only difference is that about 2 weeks ago the BCM recall that was pending was and the dealership never did before selling me the car, was finally done.

There are 4 codes to change according to the Spreadsheet, here are the changes I did.

APIM Module

7D0-05-01 - *xxx xxxx xx Changed from 0 (default value) to 2
7D0-09-02 - xxxx xxxx x* Changed from 5 (default value) to D - Looked at the options and selected the one that had all the other parameters the same and just enable the TSR

HCM Module

734-05-01 - xxxx xxx* xx Changed from 0 (default value) to 2

IPC Module

720-03-02 - xx*x xx Changed from 0 (default value) to 8 - Looked at the options and selected the one that had all the other parameters the same and just enable the TSR

This been my second attempt with same results and realizing that I lost the Reverse Guidance Lines, I just put it back as it was and will let it to rest. At least with the information on this Database Spreadsheet, it seems that I won't be able to turn this feature on.

 

[GrabThatBlue]

I just tried again, doing what I've done before, I changed all the Codes where shows any info about Traffic Sign using the ForScan Database Worksheet of this thread. Just like before, no Traffic Sign icon on Dashboard but this time I just realized something I didn't the last time, by doing this I lost the Directional Reverse lines. And this time I couldn't find any Menu with the options as before, the only difference is that about 2 weeks ago I was done the BCM recall that was pending and the dealership never did before selling me the car.

There are 4 codes to change according to the Spreadsheet, here are the changes I did.

APIM Module

7D0-05-01 - *xxx xxxx xx Changed from 0 (default value) to 2
7D0-09-02 - xxxx xxxx x* Changed from 5 (default value) to D - Looked at the options and selected the one that had all the other parameters the same and just enable the TSR

HCM Module

734-05-01 - xxxx xxx* xx Changed from 0 (default value) to 2

IPC Module

720-03-02 - xx*x xx Changed from 0 (default value) to 8 - Looked at the options and selected the one that had all the other parameters the same and just enable the TSR

This been my second attempt with same results and realizing that I lost the Reverse Guidance Lines, I just put it back as it was and will let it to rest. At least with the information on this Database Spreadsheet, it seems that I won't be able to turn this feature on.

A few posts ago I told you multiple times that I might be possible to help you out if we can do this step by step. But for some reason you went again on your second try today just with the information you could find from the spreadsheet without knowing the background information on what to turn and what it's for.

Since Forscan is a jungle of information, it is best to do things step by step. But okay, if you want to leave it as it is, that's okay too. I just wanted to help.

 

[erasat]

A few posts ago I told you multiple times that I might be possible to help you out if we can do this step by step. But for some reason you went again on your second try today just with the information you could find from the spreadsheet without knowing the background information on what to turn and what it's for.

Since Forscan is a jungle of information, it is best to do things step by step. But okay, if you want to leave it as it is, that's okay too. I just wanted to help.

There are 4 codes to change in the whole spreadsheet, I just described them to you so you could verify that I just changed what I needed to the only value available to turn it on. All changes on each module requieres to cycle the connection so every time I finished with all the changes by module, after I restarted the car, I checked if the Speed Sign was on, it wasn't, so I went to the following module and did the same each time. At the end there were still no speed signs and doing the 4 changes removed the Directional reverse lines, so that's what I posted here for you and others that might help, could verify.

The reason I posted each code and the changes done, was for you to verify if you have the same on yours or maybe you know an additional line of code that needs to be changed, but if what you have in there are the same that I just posted, like I explained, its the second time I have tried them, with the same results. Of all the changes I've tried to do using ForScan this is the only one that doesn't work. I appreciate your intentions and help, I'm just letting you know that when I'm asking about this specific one is not because I don't know how to use ForScan or I'm a newbie, it's simply because it's the only one that doesn't work as expected.

Do you have any other code changes I may try? Would you this in a different way than what I described above and recycling ForScan after each module changes? Do you think it.will require any specific order to do such changes? I may be willing to try it again if that's the case. Thank you.

 

[GrabThatBlue]

There are 4 codes to change in the whole spreadsheet, I just described them to you so you could verify that I just changed what I needed to the only value available to turn it on. All changes on each module requieres to cycle the connection so every time I finished with all the changes by module, after I restarted the car, I checked if the Speed Sign was on, it wasn't, so I went to the following module and did the same each time. At the end there were still no speed signs and doing the 4 changes removed the Directional reverse lines, so that's what I posted here for you and others that might help, could verify.

The reason I posted each code and the changes done, was for you to verify if you have the same on yours or maybe you know an additional line of code that needs to be changed, but if what you have in there are the same that I just posted, like I explained, its the second time I have tried them, with the same results. Of all the changes I've tried to do using ForScan this is the only one that doesn't work. I appreciate your intentions and help, I'm just letting you know that when I'm asking about this specific one is not because I don't know how to use ForScan or I'm a newbie, it's simply because it's the only one that doesn't work as expected.

Do you have any other code changes I may try? Would you this in a different way than what I described above and recycling ForScan after each module changes? Do you think it.will require any specific order to do such changes? I may be willing to try it again if that's the case. Thank you.

That's why I wanted to help you step by step and not just throw random lines so you can copy paste. Forscan does not always work like how you described. There are way more than 4 codes to change for this matter and not every Mustang has to change all these codes. Also, not every Mustang is coded the same, even when they are from the same region. So sometimes yours need a different number to change in the line than mine to make the same thing work.

If you can show me what you have on these lines, I will find out what you have to change.

APIM
7D0-05-01
7D0-09-02
7D0-09-04
IPC
720-03-01
720-03-02
720-07-01
720-09-01
720-09-02
720-10-01
IPMA
706-01-01
706-02-01
706-04-01
706-05-01

 

[npole]

Could someone with a US car report the content of this addresses please:

7E0-163-01
7E0-163-02

Thanks!

 

[GrabThatBlue]

Could someone with a US car report the content of this addresses please:

7E0-163-01
7E0-163-02

Thanks!

US Mustang:
7E0-163-01 1001 0100 015E
7E0-163-02 0132 398E D908

Can you share your abuilt data with me since you have a European.
I want to compare everything with mine and see what I can change since I'm moving to Europe.

 

[npole]

Sent (we aware that certain addresses have been changed.. so my "AsBuilt" isn't stock anymore.. but I guess you'll like to preserve those functions, like remote start, rev, etc.).

 

[Sainty]

@npole @GrabThatBlue
Quite happy to provide both of you my VIN if it'll help?

 

[GrabThatBlue]

@npole @GrabThatBlue
Quite happy to provide both of you my VIN if it'll help?

Thanks man, I just received a European as-built.
I'll be busy now until midnight comparing. I really starting to like this haha.

 

[GrabThatBlue]

Sent (we aware that certain addresses have been changed.. so my "AsBuilt" isn't stock anymore.. but I guess you'll like to preserve those functions, like remote start, rev, etc.).

Thanks man. What are the things you changed?
You just enabled remote start and remote rev, or also some other drastic changes.
And indeed, I want to keep remote start and remote rev haha.

Sponsored